Description
This type of laser marking machine can remove the original fixed bracket and make handheld marking, the laser marker desktop and handheld design can meet a variety of production. It can meet two different marking requirement at the same time.
Laser Marking Machine adopts the imported fiber laser generator with good fiber laser beam quality, high speed Galvo system to enable stable laser output and high qulity laser mode. This model 50W Fiber Laser Marking boasts for its fast marking speed(12000mm/s), good marking effect and high efficiency to meet the demand of mass production. Furthermore,Fiber Laser Marking Machine Price also enjoys the advantages of easy operation, low running cost, long-term trouble –free working and free from maintenance. All these factors devotes to its capacity to satisfy industrial production.
Feature
1. Best Marking Effect: the laser beam of fiber laser is fine and thin. It can provide the best marking effect among all the laser machine machines. Especially good in smallest character marking, such as mark on IC chip.
2. Deep Marking: Fiber laser can make deep marking up to 1.0mm on stainless steel and aluminum.
While YAG and Diode marking only could mark 0.2mm-0.3mm. So it’s suitable for the industries
which has high requirement to the depth and accuracy.
3. Higher Accuracy: fiber laser can reach up to 0.002mm precision, while diode only 0.01mm.
4. 10 Years Long lifetime:, the lifetime of the fiber laser device is 10 thousand hours, so the machine can be used for 8-10 years. As for diode laser module is 2 thousand to 3 thousand hours and only can be used for 1-3 years.
5. No consumables: Fiber laser machine can be used for 8-10 years with any consumables.
6. No need to adjust the laser path: fiber laser beam comes out from the fiber device directly, so
no need to adjust the laser optical path. While Diode laser need to adjust the laser optical path
regularly.
7. Free of Maintenance: Fiber laser machine can be used free of maintenance. Diode laser need
to change the diode module and recycle water regularly.
8. Use Integrated Air Cooling: Fiber laser uses integrated air cooling, and the cooling effect is
excellent than the water cooling used in Diode and YAG laser. Also, air cooling no need to maintain,
save many cost and energy.
9. Low Power Consumption: low cost, only 0.5kw/hour. While Diode is 3kw/hour, and YAG is
5 kw/hour. Fiber laser is more economized and environmental.
10. Small and compact: It can be put in desk and easy to install and move .Aslo can handheld,easy operating.
1. Laser Source(IPG/Raycus/JPT 20W / 30W / 50W)
2. Trolley
3. Computer
4. Operation System(WIN XP/7/8/10 English Version)
5. Marking Software(EZCAD, Engish Version)
Technical Parameter
| Product name |
Multifunction Automatic optical Fiber laser marking machine with Protable handles |
| Model |
MH-F30D |
| Laser Power |
20W; |
| Wavelength |
1064nm |
| Frequency |
20-100KHz |
| Marking Mode |
Static and dynamic |
| Marking fonts |
Marked, dot matrix |
| Marking Scope |
110X110MM, 145X145MM 200X200MM(optional) |
| Marking Depth |
0.01-0.3mm; |
| Marking Speed |
≤12000mm/s |
| Min marking character |
0.15mm |
| Cooling Method |
Air Cooling |
| Power Supply |
AC220V/50Hz |
| Consumption of Electricity |
800W; |
| Warranty of Flying Laser Marking Machine |
The whole machine is guaranteed for one year. |
| Operating temperature |
5-40℃ |
Samples Show
Packing And Delivery
1. We have 3 layers package. For the outside, we adopt wood craft case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by thickening plastic bag for waterproof.
2. Air-Worthy Packing or Sea Packing which comply with international standard. We can send machine to your port or door address by sea.
Our Service
Pre-Sales Service
* Inquiry and Consulting Support
* Sample Testing Support
* View Our Factory
After-Salse Service
* Trainning of Installation and Operation
* One Year Warranty
* 24 Hour Technical Support
